The DragMaster® Light Tree

 

The pairing of our patented Convertible Split Start Gate with the DragMaster® Light Tree creates a great drag racing event!

It even red-lights a false start!


Watch The Video!




The DragMaster® Light Tree is free-standing, measures 32 inches tall, with 8 inch wide cross arms featuring LED lights, and has a 10 inch wide base plate.
Weighs only 6 pounds.

You are able to use the DragMaster® Light Tree with a manual release start gate or a remote start gate.

Priced at $495.00

Modes of Operation:

1. Display Only Mode. In this mode, the light tree is used to add realism to your race by having the lights descend to signal the start of each race. The light tree does not start the race, you will need to manually release the start gate when the lights turn green.

2.  Remote Start Mode*. In this mode, the light tree is connected to one or more remote start gates which are then activated when the lights turn green. The light tree will drop the start gate automatically. See info below.

3. Drag Racing Mode. In this mode, the light tree is connected to the Champ Timer and automatically starts the timer counting when the lights turn green. The light tree will detect if one or both start gates are activated before the lights turn green, and will trigger the red light for that lane (red-lighting).
Drag Racing Mode is used with our patented convertible split start gate*. See info below.

Any of the above three modes of operation will be used with your choice of one of the following light sequencing modes:

"Pro" Mode: In this mode, after the staging lights are lit, all six amber lights will illuminate together, then the green lights will illuminate.

Normal Mode: In this mode, after the staging lights are lit, the amber lights will illuminate in descending order down the tree, then the green lights will illuminate.

The DragMaster® Light Tree has adjustments for brightness and light speed.

Note: Only use approved remote start systems with the DragMaster® Light Tree.

 

* The Remote Start, Convertible Split Start Gate, Dual RCA Cable, and Drag Racing Hook-Up Kit are sold separately; they are not included with the DragMaster® Light Tree.

The DragMaster® Light Tree can be used in display only mode without any additional accessories.

 

Available Accessories:

DragMaster® Drag Racing Hook-Up Kit - Allows you to use the DragMaster® Light Tree in drag racing mode.

The Hook-Up Kit includes a 6ft. light tree to timer cable, start gate switch/jack/start button assembly, and 50ft. light tree to start switch cable.

50ft. Dual RCA Remote Start Cable - Allows the DragMaster® Light Tree to automatically activate one or two remote start gates.